| With the growing popularity of using individual coils on 20V engines something is needed to hold the coils down. This plate bolts to the cam cover where the original spark plug lead holders used to be bolted. It fits to both 20V heads and leaves enough room for wiring. No modifications are needed to the cam cover. |
 |
| Pictured
above is the
final adapter design, it is cut and machined from aluminium plate and
bolts directly into place without modification. The three high tensile
silver zinc bolts are supplied with the sale. Suits both 1NZ and 1ZZ
coils, please see here to see which cars where fitted with these coils
from new: Toyota NZ engine, Toyota ZZ engine.
Note: the 1ZZ coils need to spaced up under the mounting tab with some
washers to be the correct height, machined spacers can be supplied if
wanted. Price for Complete Assembly: $120 AUD/USD (Click on any image to zoom in) |
 |
The
left picture shows a demo fitment with both types of compatible coils,
the plate picture was the first prototype and is bulkier than the final
design. The lower left is a 1NZ coil and a 1ZZ coil on the upper right. (Click on any image to zoom in) |
